This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.

BEWARE OF CHEAP QUALITY

There is good quality and there is cheap quality. Be very suspicious of low cost units because they may be very limited in their use. Nex Flow™ offers a high quality unit at an excellent price.

A DECENT FLOW CONTROL SYSTEM

All Nex Flow™ products are designed to improve plant efficiency buy either reducing the compressed air used while it is being used, or in some way to reduce maintenance, or in another way to improve productivity. But the nice thing about compressed air is that this energy comes from “storage” and can be called upon only when needed. The Nex Flow PLC Flow Control System (PLCFC) provides this on demand control. It minimizes the use of compressed air on any blow-off, cooling, conveying, drying or static control system utilizing a photo electric sensor to turn the air on and off as required.

MAKE SURE YOU KNOW WHAT YOU ARE GETTING

The Nex Flow™ PLC Flow Control System is not some inexpensive simple box with a timer and low cost sensor – it is far more.

The X-Stream™ Air Flow Meter represents a radical departure from conventional air flow meter designs, providing easy installation, low cost and accurate of the probes in the air stream.

The air flow meter clamps around a pipe with its probes projecting into the pipe through drilled holes. The low cost of the air flow meter makes it ideal for installation at points throughout the air distribution system to track valuable compressed air and assess system operation.

X-Stream™ Sound Level Meter is used to measure and monitor the sound level in all types of industrial environments. Used for compressed air exhaust noise measurement it can identify areas where costly and inefficient blow off can be replaced by energy efficient Nex Flow™ blow off products. In many instances, noise may be reduced by amplification products as much as 10 dBA, to protect workers from excessive and damaging noise levels and reduce energy use.