Installation Manual LCD Operator AC Drive-Option Type JVOP-180

◆ About This Product The LCD Operator Option provides an enhanced drive user interface that can operate the Yaskawa drive at a short distance up to 3 meters. The LCD Operator Option can display information in eight languages, including English, Japanese, and Spanish.The LCD Operator Option is an LCD display that simplifies the task of interfacing with the drive to perform these tasks: • Read or modify drive parameters. • Read and copy drive parameter settings to another Yaskawa drive. • Operate the drive. • Monitor drive operation status. Note: When the LCD Operator Option is installed and connected to the V1000 it will cause the drives built-in LED operator to display a series of dots as shown in Table 1. This is normal operation. Additionally, all keys except for the STOP key on the drives built-in LED operator will not function when the LCD Operator Option is connected. If desired, to also disable the STOP key on the drives built-in LED operator, set parameter o2-02 (STOP Key Function Selection) to 0 (Disabled). Table 1 Built-in LED Display When LCD Operator is Connected to V1000 Display LED Display Drive Status Illuminated During Stop Flashing During Run